Godzilla Building Mod - Multi-ball SDTM Fix

Average rating:
No items found.




Production Status:


Associated Games:

Product Description

I just put the finishing touches on a mod to stop the Godzilla multi-ball SDTM issue. I have been testing this for the past few weeks and it works great. All three balls feed to the left flipper and you get a nice separation after they rebound off the flipper. Regarding installation, it takes less than 5 minutes. You remove the 4 screws holding on the two standard plastics on top of the building, remove the spacers from the old plastics and put them on this mod, slide the baseplate into position, and add the four screws. Stay safe and play more pinball!


Add your review!
Thank you! Your review has been received!
Oops! Something went wrong while submitting the form.
No items found.